Our cornice profiles come in 2 meter lengths.
All profiles are available in XPS, EPS-HD and EPS-LD.
Enquire directly to find out more about our different packaging options.
Extruded Polystyrene is a closed cell polystyrene rigid
foam board, with high compressive strength and excellent long term
thermal resistance performance, due to its inherent resistance to
moisture transfer.
XPS Polystyrene can be recycled, and has the number “6” as its recycling symbol. Polystyrene does not biodegrade.
XPS material used is classified in accordance with SANS 428 using
the SANS 10177 - 10 and 11 Horizontal test protocols and obtained -B/B1 fire rating.
Expanded Polystyrene is produced by expanding
polystyrene beads, which are then bonded together to form rigid boards.
EPS is manufactured in two densities. The
high density board is more moisture resistant.
EPS is 100% recyclable and re-usable. It can either be mechanically
recycled into several applications or chemically converted into other
products.
EPS material is fire retardant and will not propagate or contribute to the spread of fire.
EPS is non-toxic, does not contain CFCs and does not decompose into harmful substances.
Polystyrene will “break down” if left exposed to sunlight for
prolonged periods.
It must also be protected from solvents and only
compatible adhesive & sealants should be used.
Easy to use; is easily painted using PVA applied by brush or spray. Bonds easily to other materials.
Light weight, easy to transport and install.
Moisture resistant, increasing water penetration resistance.
This site was created with the Nicepage